Turf Aerator-Sitron-DK120-Sports Field
Here are some features of a vertical aerator:
Aeration depth: Vertical aerators can typically penetrate the soil to a depth of 1 to 3 inches. This allows for better air, water, and nutrient flow to the roots of the turf, promoting healthy growth and reducing soil compaction.
Aeration width: The width of the aeration path on a vertical aerator can vary, but it is usually narrower than that of other types of aerators. This means that more passes may be required to cover the entire lawn.
Tine configuration: The tine configuration on a vertical aerator consists of vertical blades that penetrate the soil. These blades can be solid or hollow, and they can be spaced close together or further apart.
Power source: Vertical aerators can be powered by gas or electricity. Gas-powered aerators are typically more powerful and can cover a larger area, while electric aerators are quieter and more environmentally friendly.
Mobility: Vertical aerators can be pushed or pulled across the lawn. Some models are self-propelled, making them easier to maneuver.
Additional features: Some vertical aerators come with additional features, such as seeders or fertilizer attachments. These attachments allow homeowners to aerate and fertilize or seed the lawn at the same time, saving time and effort.
Overall, vertical aerators are a good choice for homeowners with smaller lawns or those who want to maintain their lawns on their own. They are generally less expensive than other types of aerators and can be used with minimal training or experience.
| SITRON DK120 Turf Aerator | |
| Model | DK120 |
| Brand | KASHIN |
| Working Width | 48” (1.20 m) |
| Working Depth | Up to 10” (250 mm) |
| Tractor Speed @ 500 Rev’s at PTO | – |
| Spacing 2.5” (65 mm) | Up to 0.60 mph (1.00 kph) |
| Spacing 4” (100 mm) | Up to 1.00 mph (1.50 kph) |
| Spacing 6.5” (165 mm) | Up to 1.60 mph (2.50 kph) |
| Maximum PTO speed | Up to 500 rpm |
| Weight | 1,030 lbs (470 kg) |
| Hole Spacing Side-to-Side | 4” (100 mm) @ 0.75” (18 mm) holes |
| 2.5” (65 mm) @ 0.50” (12 mm) holes | |
| Hole Spacing in Driving Direction | 1” – 6.5” (25 – 165 mm) |
| Recommended Tractor Size | 18 hp, with minimum lift capacity of 1,250 lbs (570 kg) |
| Maximum Capacity | – |
| Spacing 2.5” (65 mm) | Up to 12,933 sq. ft./h (1,202 sq. m./h) |
| Spacing 4” (100 mm) | Up to 19,897 sq. ft./h (1,849 sq. m./h) |
| Spacing 6.5” (165 mm) | Up to 32,829 sq. ft./h (3,051 sq. m./h) |
| Maximum Tine Size | Solid 0.75” x 10” (18 mm x 250 mm) |
| Hollow 1” x 10” (25 mm x 250 mm) | |
| Three Point Linkage | 3-point CAT 1 |
| Standard Items | – Set solid tines to 0.50” x 10” (12 mm x 250 mm) |
| – Front and rear roller | |
| – 3-shuttle gearbox | |